25 cent Fidget Spinner

Tell us the story of your project.: 
The STL file for this project was drawn on Fusion 360. The STL file is at Thingiverse https://www.thingiverse.com/thing:3358353Here is the fidget spinner in the 3D printer.Each opening of the spinner will fit 5 pennies and the middle opening will snugly fit a standard skateboard bearing. 

The bearing will fit in place with a few light taps with a hammer.

 

Either epoxy or regular glue can be used to keep the pennies in place. The fidget spinner is fun to use!

Share a "Show & Tell" video.: 
https://www.youtube.com/watch?v=HkvMADa-m9U&t=13s
Collaborators: 
rehoganfamily
Number of Forks: 
0
Choose at least one category.: 
Team Members: 
Team member name: 
rehoganfamily
What role did this person play on the project?: 
Project Lead
Public
Sort Order: 
0
Teaser: 
This is a great fidget spinner to build. It uses a standard skateboard bearing and 25 pennies. The STL file is linked.
Aha! moment: 
With 3D printing good measurements are important!
Uh-oh! moment: 
The epoxy we used for the first fidget spinner was so messy. Regular Elmers glue works just as well.
Show & Tell video as default: 
Creation Date: 
Tuesday, January 15, 2019 - 13:56

Add new comment